Concrete Products

AUG 2018

Concrete Products covers the issues that attract producers of ready mixed and manufactured concrete focusing on equipment and material technology, market development and management topics.

Issue link:

Contents of this Issue


Page 69 of 71

68 • August 2018 FINAL FORM BY DON MARSH Penthouse protection The prototype took shape at the ETH Zürich Robotic Fabrication Lab. With participation from Holcim Schweiz staff, the Block Researcher team pegged a concrete mix fluid enough to be sprayed and vibrat- ed, yet sufficiently viscous to remain on the fabric. Researchers tested the ultra-thin concrete concept with an eye to NEST, a project under way on the Empa-Wawag campus and charac- terized as "a dynamic, modular research and demonstration plat- form for advanced and innovative building technologies." RENDERING: Doug & Wolf PHOTOS: Naida Iljazovic (formwork, shotcrete) and Michael Lyren- mann (finished shell) for Block Research Group/ETH Zürich Assisted by a technical arm of Switzerland's Holcim Ltd., researchers deployed digital design and placement methods for an ultra-thin, curved concrete roof prototype at the ETH Zürich Robotic Fabrication Lab. The late-2017 demonstration of sprayed concrete on cable-bound, fabric formwork ushers a commercial premier at NEST, a project on the Empa-Wawag campus in D ü bendorf, Switzerland. The prototype structure displays hyberbolic paraboloid forms across 1,722 square feet of surface area over a 1,290-sq.-ft. space. The shell reaches nearly 25 feet high and averages 2-in. thick, with a thickness range of 1.2-in. (edges) to 4.75-in. (support surfaces). The self-supporting shell has an inner concrete layer bearing heating and cooling coils plus insulation; an exterior concrete layer completes a sandwich-style cross section. Researchers used a net of steel cables stretched into a reusable scaffolding structure and supporting a polymer textile functioning as formwork. The cable net is designed to take on the desired shape under the weight of the wet mixes, owing to a calculation method developed by the Block Researcher Group and Swiss National Centre of Competence in Digital Fabrication collaborators. Their algorithms ensure that forces are distributed correctly between the individual steel cables and the roof precisely assumes the target geometry. The shell is envisioned for HiLo, a NEST penthouse apartment unit for guest faculty. Leading the ETH Zürich prototype and NEST projects are Empa-Wawag Professors of Architecture Phililppe Block and Arno Schlüter, who seek to integrate the new lightweight concrete con- struction with intelligent and adaptive building systems.

Articles in this issue

Links on this page

Archives of this issue

view archives of Concrete Products - AUG 2018