Concrete Products

JUL 2018

Concrete Products covers the issues that attract producers of ready mixed and manufactured concrete focusing on equipment and material technology, market development and management topics.

Issue link:

Contents of this Issue


Page 15 of 103

14 • JULy 2018 GOVERNMENT AFFAIRS REGULATIONS The Occupational Safety and Health Administration outlined initial enforcement protocol of its revised standard, Respi- rable Crystalline Silica Standard for General Industry and Maritime, most provisions of became enforceable in June. The standard establishes a new eight-hour time-weighted average permissible exposure limit and action level, plus associated ancillary requirements. OSHA will offer compliance assistance this month for employers who make good faith efforts to abide the new exposure thresholds. "If upon inspection, it appears an employer is not making any efforts to comply, compliance officers should conduct air monitoring in accordance with Agency procedures, and consider citations for non-compli- ance with any applicable sections of the new standard," OSHA Acting Deputy Assistant Secretary Galen Blanton noted in an early-June memorandum to regional administrators. "Any proposed citations related to inspections conducted in this 30-day time period will require National Office review prior to issuance." The agency intends to issue interim enforcement guidance until a compliance directive on the new standards is final- ized. OSHA's Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for General Industry and Maritime, discusses methods of compliance, such as using engineering and work practice controls, assessing exposure levels, respi- rator use, medical surveillance, and written exposure plans. OSHA continues silica rule compliance assistance for brief interim CONCRETE PLANT MEASURES National Ready Mixed Concrete Association Executive Vice President, Compliance & Operations Gary Mullings and Vice President, Compliance & Regulatory Affairs Kevin Walgenbach review raw materials, plant conditions, housekeeping mea- sures, worker protection, exposure monitoring and best compliance practices in "Guide for Silica Regulations and the Ready Mixed Concrete Industry." Based on the Occupational Health and Safety Administration's "Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for General Industry and Maritime," the document was prepared to help producer members abide agency regu- lations effective June 2018. The General Industry standard (1910.1053) for silica exposure follows a companion Construc- tion (1926.1153) standard effective September 2017. Both lower thresholds for silica exposure and establish new workplace or site monitoring procedures. 1000 Venture Blvd. Wooster, OH 44691 • Call Wes Dees at 330-749-2042 email: a product of Prefabricated, Chemically Resistant, Cast-In Concrete Liner System • For use in: manholes, septic tanks, grease traps, process water applications and more! • Cast in the product - no waiting! • Excellent chemical resistance, including H 2 S gas

Articles in this issue

Links on this page

Archives of this issue

view archives of Concrete Products - JUL 2018