Concrete Products

JUN 2017

Concrete Products covers the issues that attract producers of ready mixed and manufactured concrete focusing on equipment and material technology, market development and management topics.

Issue link:

Contents of this Issue


Page 35 of 51

34 • June 2017 INNOVATIONS REPORT BY SILCA SYSTEMS For years, decks, elevated patios and balconies have been popular choices for homeowners when designing or remodeling their outside living spaces. Until recently, options have been limited primarily to wood or composite materials since natural stone, pavers and tile— while aesthetically pleasing—were too heavy and difficult to install on traditional wood joist framing. A new durable, plastic polymer grid system is facilitating the installation of stone up to 3-in. thick for elevated surfaces. Designed to support the structural load across a 16 inch on center span, the system effectively opens up the entire range of stone options for ele- vated surfaces to include the use of natural stone pavers, travertine, pavers, slate, marble, and tile. "With traditional deck materials, it was nearly impossible to use stone on any elevated surface," explains general contractor Jim Rich- ardson of Richardson Brothers Construction & Demolition, Kendall, N.Y. "I wanted to offer stone decks to my customers, but any under- layment would have trapped moisture. Plus, the joist system would have to be significantly reinforced to support the weight." According to Richardson, whose company builds and remodels high-end, custom homes, many customers are naturally attracted to stone because it adds substantial value to and increases the aesthetic appeal of their homes while requiring little maintenance. "In my opinion, no composite deck can compare to the beauty of a stone deck," he adds. "There's something about the stone that adds style and class and just feels solid." Upstate New York weather can dictate the use of elevated surfaces for non-deck areas. Due to the region's freeze/thaw cycles, installing stone directly on the ground can have unexpected consequences. "Even with thorough base preparation, the freezing ground, frequent thaws and ground settling make it very difficult to install stone on the ground," Richardson explains. "As the years pass, pavers tend to heave up and down, requiring further upkeep and maintenance." By elevating the stone, he notes, "there is no more heaving, and the grass doesn't grow between the pavers." SILCA SYSTEM The installation of a stone deck with Silca Grates is comparable in cost to traditional wood or composite decks, depending on the type of stone used. "When you compare by square footage, labor and material for installation, the costs for stone decks are very similar to wood or composite decks," Richardson affirms. Designed and manufactured by Sare Plastics, a custom injection molding operation, the Silca System is a deck inlay subflooring grid that can be used on new decks or retrofit applications, and is certi- fied to meet International Code Council standards. Silca Grates are based on the hexagonal structure of beehives, manufactured from engineered polymers into 1.5-in.-thick grids, and ensure a structural surface for natural stone and manufactured pavers. Silca Grates are fastened to deck joists 16 inches on center using four 3-in. deck screws coated for pressure treated lumber. The grates can easily be cut to any length or contour using a circular, table or reciprocating saw. "I had never seen anything like it before, but was amazed at how easy it was to cut and install to match the shape of any elevated structure," says Richardson. "I can use it to build anything Installation system opens market for elevated stone decks, patios, stairs Silca Systems provides a durable structural surface for natural stone and manufactured pavers.

Articles in this issue

Links on this page

Archives of this issue

view archives of Concrete Products - JUN 2017