Concrete Products

MAY 2017

Concrete Products covers the issues that attract producers of ready mixed and manufactured concrete focusing on equipment and material technology, market development and management topics.

Issue link: http://concrete.epubxp.com/i/821154

Contents of this Issue

Navigation

Page 62 of 67

www.concreteproducts.com May 2017 • 61 TECHNICAL TALK SONOASH application utilization rate has nearly doubled over the last decade to nearly 45 percent, even as the aforementioned share of coal in the global energy mix has declined. 2 The decline in coal use has changed the volumes of reliable and uniform, high quality CCR available to the concrete and construction industries, as measured by consistent Loss on Ignition (LOI; reflecting carbon concentration) and impurities (such as sulfur and nuisance heavy metals). Key concrete parameters like workability and ASTM C618-grade material particle size are often assumed to be consistent in the marketplace but are not. Each of these CCR components have highly empirical correlations with one another as it relates to HPC and LEED-el - igible applications, where reuse has significant value-add upside. NEW BENEFICIATION METHOD A commercial stage process of Vancouver, B.C.-based SonoAsh LLC enables a sustainable, modular and patented solution for produc- tion and impounded CCR, and holds potential for an unprecedented expansion of North American ash stores available to meet growing infrastructure market demands. The latter is achieved by creating pathways to make impounded and production CCR streams into a consistent Manufactured Coal Ash to meet regional individual cus- tomer specifications. Every coal powered plant burns, and has burned, different coal supplies from different sources at different times. This results in significant impediments to subsequent beneficiation of storage impoundment-derived raw feeds because of the infinite CCR combi- nations of coal ash, bottom ash and boiler slag—in addition to any unique regional environmental conditions and power plant control effects. The SonoAsh Sonicator reactor processes a broad range of coal ash samples, netting a Manufactured Coal Ash that meets ASTM C618 (AASHTO M295) requirements for high value ordinary portland cement (OPC) displacement, typically at < 1 percent LOI with vari- able CCR sources, to more than 15 percent LOI at definable particle size specifications, typically 25-100 µm. It is important to note that commercialized dry beneficiation technologies cannot readily pro- duce both tunable low LOI and controlled particle size. As a result, these requirements are subsequently not present in ASTM standards, creating a barrier to high value, engineered HPC applications for challenging infrastructure and marine environments. The SonoAsh outcome is a genuine market opportunity producing a scalable, regional and highly economical OPC supplement with negli- gible greenhouse gas (GHG) impact. This creates relevance from a risk mitigation and marketing perspective even where GHG discussions are unmeasured, untaxed or not currently recognized. This is significant for a global market demanding major infrastructure expansion with challenging HPC applications. As coal ash supplies continue to both shrink and diversify, the SonoAsh intellectual property creates opportunities for the cement and concrete industries that cannot be consistently achieved with dry milling and typical dry coal ash beneficiation technologies. The wet SonoAsh process produces no fugitive emissions (airborne emissions or odors) and is readily deployed at coal-fired generating stations or long-term coal ash storage facilities. Despite the apparent suspen- sion of the U.S. Environmental Protection Agency effluent limitation guidelines (ELGs), SonoAsh believes strongly that for broad adoption, it is necessary to have process designs incorporating maximum water reuse and recovery to minimize water consumption. Ultimately, Sono- Ash believes it is possible to achieve zero liquid effluent discharge production facilities and is producing scale up designs to process 200,000 to 500,000 tons of diverse CCR annually. Consistent particle size allows for expanded use of variable CCR to produce a Manufactured Ash product with a high fineness and low carbon content. This creates a reproducible high strength activity index from CCR normally considered to be of negligible or no value. Consequently, the use of CCR permit concrete to be produced with reduced water demand in comparison to traditional OPC concrete of the same workability. 5 More consistent and low LOI CCR from variable sources allow for regional utility of CCR for low water concrete appli- cations to be used with reduced air entrainment chemicals and water volumes, which in turn reduces concrete bleeding. The ability to apply low, variable quality CCR for very high value applications by defining particle size, with very low LOI, creates an unprecedented opportunity. There is now a line of sight to take these low value, high environmental risk stores and transform them into a high quality, low energy input material supply chain for 21st century cement and concrete applications. The author will be discussing the pathway for Coal Ash 2.0 this month at the 2017 The World of Coal Ash Conference in Lexington, Ky. — SonoAsh LLC, Vancouver, British Columbia, www.sonoash.com Claudio Arato is a registered professional engineer with 25 years' expe- rience and degrees from the University of British Columbia (UBC) in Chemistry and Chemical Engineering. He is SonoAsh Chief Technology Officer and inventor of the SonoAsh technology. He was elected as an Engineers Canada Fellow in 2011, received the 2014 Engineers Canada Meritorious Achievement Award and a UBC Dean's Medal of Distinction in 2015. He has presented on engineering innovation, ethics and sus- tainability throughout North America and Mexico. Sources 1 Morgan, G., Financial Post, "'Coal is in Decline' and it looks like not even Donald Trump can pull the industry's long-term future out of the fire", March 8, 2017, http://business.financialpost.com/news/energy/coal-is-in-decline-and-it-looks- like-not-even-donald-trump-can-pull-the-industrys-long-term-future-out-of-the-fire (last accessed April 21, 2017). 2,3 Black, A.P. et al., American Road and Transport Builders Association, "Production and Use of Coal Combustion Products in the U.S.: Market Forecast through 2033", June 2015. 4 Untitled, "Coal Ash: 'Why in the World We Be Importing It?'" (published March 23, 2017) http://www.foxnews.com/us/2017/03/23/coal-ash-why-in-world-would-be- importing-it.html (last accessed April 21, 2017). 5 Thomas, M., "Optimizing the Use of Fly Ash in Concrete." http://www.cement. org/docs/default-source/fc_concrete_technology/is548-optimizing-the-use-of-fly- ash-concrete.pdf (last accessed April 22, 2017). SonoA S h CCR St R ength A C tivity i ndex Percentages versus portland cement control specimen Portland cement displacement 3 Days 7 Days 28 Days 56 Days Water requirement 20% 88 87 95 104 94 30% 80 76 88 99 92 40% 72 66 81 95 89 ASTM C618 -- 75 (min) 75 (min) -- 105 (max)

Articles in this issue

Links on this page

Archives of this issue

view archives of Concrete Products - MAY 2017